ОАО «Протон-ПМ»


 
Main page Production Technological capabilities

Technological capabilities

Other types of technological processes

1. Cable production  
Cable trunks and electric wiring harnesses; 
Interconnection wiring of cable trunks using electro- and cartridge automation systems and manufacturing of data transmitter and automatic equipment cabinets.

2. Molybdenum and nickel coating using vapor-phase metal coating in a vacuum 
Part diameter: up to 1,500 mm; height: up to 100 mm

3. Bead blasting of rotary parts
Part diameter: up to 1,300 mm; length: up to 2,500 mm

4. Flame plating of rotary parts 
Part diameter: up to 1,300 mm; length: up to 2,500 mm

5. Plasma coating of surfaces, including non-metallic rotary parts 
Part diameter: up to 1,300 mm; length: up to 2,600 mm

6. Spray-painting using any kind of paint-and-lacquer coating
Products can be dried up later (through thermopolymerization of coating) in electrical cabinet or conveyor dryer furnace. 
Chamber dimensions: up to 3,000 х 4,000 mm, height: up to 2,500 mm; electrical cabinet dimensions: up to 3,000 х 4,000 mm, height: up to 2,500 mm. 

7. Component drain with abrasives to get rid of cinder or impurities (painting preparation) in sandblasting chambers
Chamber dimensions: up to 3,000 х 4,000 mm, height: up to 2,500 mm 

8. Electropolishing
Tank dimensions: 900 х 850 mm, depth: 600 mm. 

9. Electrophysical machining 
Tank dimensions: 700 х 650 mm 

10. Vibratory treatment
Container dimensions: 1,000 х 600 х 600 mm. 

11. Cutting of sheet metal with shears 
Thickness: up to 30 mm;
Maximum length: 3,000 m 

12. Sheet bending 
Maximum thickness of rolled sheet (given the width of 400 mm and yield stress of 100 kg per sq. mm per 6-7 bends and inner diameter 430 mm): 25 mm 
Maximum thickness of rolled sheet: 1,500 mm 

13. Roll bending of sheet metal  
Thickness up to 20 mm; minimum diameter: 150 mm; roll thickness: up to 1,300 mm

show list